Skip to main content
11.07.040 Equipment Requirements of Wheeled All-Terrain Vehicles.
This section is included in your selections.

Any wheeled all-terrain vehicle operated on a City street shall include the following equipment (which equipment shall be used and operated as further prescribed herein) and shall comply with the following operational requirements, as applicable:

A. Headlights meeting the requirements of RCW 46.37.030 and 46.37.040 and used at all times when the vehicle is in motion;

B. One (1) tail lamp meeting the requirements of RCW 46.37.525 and used at all times when the vehicle is in motion upon a City street; however, a utility-type vehicle, as described under RCW 46.09.310(19), must have two (2) tail lamps meeting the requirements of RCW 46.37.070(1) and to be used at all times when the vehicle is in motion upon a City street;

C. A stop lamp meeting the requirements of RCW 46.37.200;

D. Reflectors meeting the requirements of RCW 46.37.060;

E. During hours of darkness, as defined in RCW 46.04.200, turn signals meeting the requirements of RCW 46.37.200;

F. Outside of hours of darkness, the person operating the WATV must comply with RCW 46.37.200 or 46.61.310 related to signal turns;

G. A mirror attached to either the right or left handlebar, which must be located to give the person operating the WATV a complete view of the City street for a distance of at least two hundred (200) feet to the rear of the WATV; however, a utility-type vehicle, as described under RCW 46.09.310(19), must have two (2) mirrors meeting the requirements of RCW 46.37.400;

H. A windshield meeting the requirements of RCW 46.37.430, unless the person operating the WATV wears glasses, goggles, or a face shield while operating the WATV, of a type conforming to rules adopted by the Washington State Patrol;

I. A horn or warning device meeting the requirements of RCW 46.37.380;

J. Brakes in working order;

K. A spark arrester and muffling device meeting the requirements of RCW 46.09.470; and

L. For utility-type vehicles, as described under RCW 46.09.310(19), seat belts meeting the requirements of RCW 46.37.510. (Ord. 2376, 2019) (Ord. 2376, 2019.)

Loading…