14.180.050 Parking and Access Requirements.
A. Each space or lot upon which a mobile home is to be located shall:
1. Have access from an interior driveway only.
2. Have a crushed rock or hard surface area upon which the mobile home will be located.
B. All drives within the park shall be paved and appropriate ingress and egress from each public street bordering the mobile home park shall be provided in accordance with the direction of the City Engineer consistent with standard traffic engineering practice.
C. Access roadways, vehicle thoroughfares, and recreational areas shall be provided with adequate area lighting.
D. All internal driveways, excluding parking, shall be paved and have a minimum width of 20 feet, except for one-way roads which shall have a minimum width of 15 feet.
E. All parking and access requirements shall meet the Engineering Construction Design Standards.
F. In addition to the two stalls per mobile home pad parking requirement of SMC 14.235.170, off-street parking shall be provided at a ratio of one parking space for every four mobile home pads and shall be distributed for convenient access to all pads.
G. A bulk storage and parking area for boats, campers, travel trailers, etc., shall be provided within the mobile home park. A minimum of 300 square feet of space, exclusive of driveways, shall be provided for every 10 mobile home pads. Bulk storage and parking areas shall be separated from all other parking facilities and shall be provided with some means of security. The requirements of this subsection may be waived by the City Planner, if the mobile home park developer/owner agrees to prohibit the storage of such items within the park. (Ord. 2456, 2022)